Packaging and Shipping Supply Cart

Assemble the cart as directed in the included instructions.

Fill each tier with packing and shipping supplies.
TIP: Don't forget thank you notes!

Click here for the design in Design Space®.
TIP: Feel free to create your own based on what you have in your cart! Use the labels in this link as a guide.

Now, click ‘Make It’ in the upper right corner and then click ‘Continue’ in the lower right corner of your screen.

Place the first layer of vinyl, grid-side down, onto your cutting mat and load it into your Cricut® machine. Select ‘Vinyl’ as your material and follow the prompts to cut out your design. Once the machine has finished cutting, gently peel the vinyl away from your mat. Repeat for your second vinyl layer.

Use scissors to cut away the vinyl around your design. Next, use your weeder tool to peel away the remaining negative space surrounding the initial and name. When you’re done, only the design itself should be left on the backer paper.

Cut a piece of transfer tape that’s just a bit larger than the design. Peel away the tape’s backer paper and place the tape, sticky-side down, over this part of the design. Burnish the vinyl so that it’s completely stuck to the tape.

Now, gently peel the white backer paper from the cut-out design, which now should be stuck to the transfer tape.

Apply the vinyl to the individual shelves. Burnish the vinyl, gently peel away the transfer tape, leaving the vinyl transferred to your surface.

Share your project photos with #MakeItWithMichaels